|
How to Make a St Bridget's
Cross
A custom
in Ireland is the making of crosses out of rushes for hanging
above the entrances to dwellings to invoke the help of St Briget
in warding off disease. Rushes were traditionally used to make
the St Briget's Cross. These were collected from wetlands and
cut into pieces, 8-12 inches long. Rushes can be hard to get
for city dwellers so ordinary drinking straws are a good substitute.
Use rubber bands to tie up the ends.
You will need:
9 drinking staws
4 small rubber bands
What to Do:
1. Hold one of the straws vertically. Fold a second straw in
half.
2. Place the first vertical staw in the centre of the folded
second straw.
3. Hold the centre overlap tightly between thumb and forefinger.
4. Turn the two straws held together 90 degrees counter clockwise
so that the open ends of the second straw are projecting vertically
upwards.
5. Fold a third straw in half and over both parts of the second
straw to lie horizontally from left to right against the first
straw. Hold tight.
6. Holding the centre tightly, turn the three staws 90 degrees
counter clockwise so that the open ends of the third staw are
pointing upwards.
7. Fold a new straw in half over and across all the staws pointing
upwards.
9. Repeat the process of rotating all the straws 90 degrees counter
clockwise, adding a new folded straw each time until all nine
straws have been used up to make the cross.
10. Secure the arms of the cross with elastic bands. Trim the
ends to make them all the same length. The cross is now ready
to hang.
|